˜ MULTI PULLER
All axles can be disassembled and assembled with this set.
˜ Multi puller
|
No. AS301 |
6kg 17 |
|
|
Center bolt assy |
Hexagonal 2 faced 22mm width x length 280mm (M18x2.0) |
1 |
|
Hanger |
270x38x37mm |
1 |
|
Slide arm |
60.5x30x20mm |
1 |
|
Arm M |
Æ16x105mm |
2 |
|
Hub plate |
Æ154x24mm (Screw: M18x2.0, 1/2"sq. inc.) |
1 |
|
Hub holder 1 assy. |
Æ70x34mm(Wing bolt (M6)inc.) |
1 |
|
Hub holder 2 assy. |
190/190mm (Hexagonal adjustment bolt (M10)with hole inc.) |
1 |
|
Race shaft |
Æ55x114mm (Screw: M18x2.0) |
1 |
|
Plate (4 types) |
A(Æ79x15)B(Æ71x15) C(Æ67x15) D(Æ60x15) |
1 each |
|
Hanger assy. For press |
150x50x25mm (Hexagonal bolt (M10)+washer inc.) |
1 |
|
Press arm |
Æ16x75x35mm |
2 |
|
Hanger nut |
Æ45x18mm(Screw: M18x2.0) |
1 |
|
Race holder assy. |
90x140mm (Hexagonal adjustment bolt (M10)with hole inc.) |
1 |
|
Plate bolt |
Hexagonal 2 faced 22mm width x length 34mm (m18x2.0) |
1 |
|
Arm L |
Æ16x330mm |
2 |
|
Claw |
27x25x12mm |
2 |
|
M8 Bolt |
Bolts with hexagonal holes (with washer) x100mm |
2 |
|
M10 Bolt |
M10 hexagonal bolt with hole for M10 (with washer) x100mm |
2 |
Usage
— An exclusive tool designed for vehicle axle assembling/disassembling, steering wheel diff-companion flange mission bearing & gear removal, and also a range of bearing & gear removal.
|
Axle |
Dismantling and fitting hubs and knuckles
Dismantling and fitting the bearing race
Dismantling and fitting of wheel bearings |
|
Steering |
Removing the steering wheel |
|
Differential |
Removing the companion flange |
|
Transmission |
Removing bearings and gears |
|
Others |
Removing various types of bearings and gears |
Application
— Mainly used for the axles of light to normal FF vehicles
— Applicable for steering wheels, diff-companion flanges, transmission bearings and gears in light to normal vehicles.
|
Maximum weight when in use |
19,600 N (2 t) |
|
Hub bolts |
4~5 Holes |
|
Wheel bearing diameter |
Æ64~Æ84 |
|
Bearing race diameter |
Æ47~Æ63 |
|
Hub holder 1 |
Æ68~84 mm |
|
Hub holder 2 |
Æ76~106mm |
Characteristics
— The axle can be dismantled and refitted using 1 set.
— Is applicable for hub bearings that are attached to either the inner or outer sides.
—A hydraulic press can be used making operations both easy and fast.
— The removal/installation of the arms is carried out by a one-touch set ball type system.
— The center bolt is fitted with a bearing, which makes for a light drive torque.
— Is applicable to FR and 4WD rear vehicles, as well as FF axles.
— Has a varied use on the steering wheel, differential companion flange, transmission bearing and gearing, as well as the axle.
— Is possible for use on the removal of other bearings and gearing from other devices because of interchangeable parts.
