˜ 1/2"sq. WHEEL NUT TORQUE WRENCH SET

WHEEL NUT TORQUE WRENCH SET

The time has come for all service personnel to have his or her own torque wrench because excessive tightening of impact wrenches very frequently causes trouble.  The wheel nut torque wrench has been released to deal with the present situation. The reasonable price of such wrenches make them essential tools to be owned by every operator.

Applications

— Preset torque wrench is dedicated for tightening most of 19 or 21 mm automobile wheel nuts at 10.5 kgf-cm torque. (A socket for 19mm nuts is optionally available.)

Features

— Easily tightens wheel nuts at specified torque.

— Suitable for torque management of vehicles equipped with aluminum wheels as standard, which are becoming increasingly popular.

— Powerful tool for final inspection line checking, as well as for training beginners to become accustomed with the feel of torque force.

— Pre-set type torque wrench for tightening wheel nut at regular torque. (10.5 kgf-m)

— Applicable to most of medium size cars with 19mm or 21mm wheel nut.

CAUTION                — THIS IS A MEASURING TOO.

                                — BE SURE TO READ THE INSTRUCTIONS AND OTHER MANUALS BEFORE USE.

                                — WHEN THE WRENCH GENERATES A “CLICK” SOUND OR YOUR HAND FEELS A LIGHT

   SHOCK, DO NOT APPLY FURTHER LOAD TO THE WRENCH.

                                — DO NOT USE THIS WRENCH FOR LOOSENING A BOLT OR NUT.

                                — DO NOT USE THIS WRENCH WITH LEFT-HAND THREADED NUTS.

Compatibility Table (Vehicle make)

à The torque value for light vehicles with 17mm nuts differs from the one for regular vahicles.  For this reason, the above torque wrench cannot be used. However, the torque wrench can be used on some foreign vehicles made outside of Japan.

à Compatible to wheel tightening torque value of 103N٠Em. (Not applicable to certain vehicles and wheels.)

à The wrench cannot be used for trucks and recreational vehicles as the torque required is too high.

à Check the required torque before using the wrench on non-standard wheels.

CAUTION

Notes

1.     The wheel tightening torque values are those for standard wheels used by Japanese automobile manufacturers. Be sure to check the required torque for special wheels.

2.     This Product is a measuring tool which should be handled very carefully. Take particular care never to drop, throw or hit it.

3.     Always, apply load slowly, centering around the grip line.

4.     Accurate torque value may not be obtained if load is applied by using other parts (such as a pipe)

5.     When the tool has not been used for a long period, be sure to perform “running-in” before actual measurement.

6.     Do not use the tool in rain, under high humidity or in places where it may be subject to water penetration.

7.     Do not open the tool. Otherwise, the torque value may deviate.

8.     Should operation failure, abnormal noise, dropping or submersion in water occur, immediately stop use and have qualified service personnel inspect and overhaul the tool.